1998 Chrysler Cirrus NHTSA Investigations
NHTSA Cirrus Defect Investigations
The following investigations on the Chrysler Cirrus have been announced by the ODI. Interested in how this information is collected? Read more about investigations by the NHTSA.
Recent 1998 Cirrus Investigations
-
AUTO TRANS IGNITION-PARK INTERLOCK Defect Investigation for the 1998 Cirrus
Vehicle Component: Power Train:Automatic Transmission*
Summary: The manufacturer reports above are based on DaimlerChrysler's (DC) analysis of model year (MY) 1998 (population = 356,384) and 1999 (population = 486,948) JA, JX and LH family subject vehicle data (earlier MYs excluded). The population number includes all MYs. The precise number of duplicates between ODI and DC reports cannot be determined due to missing or incomplete information. The fatality incident involved an elderly person who attempted to stop a roll away vehicle and received fatal injuries. ODI also gathered information on MY 1997-99 Prowler vehicles in this investigation. The Prowler vehicles were manufactured with a different design shifter mechanism (the shift lever is shorter). There are no complaints of Prowler interlock failure in ODI's database, and DC has received no reports either. The Prowler is excluded from the recall scope. The investigation involved a condition where the interlock system could fail (or be made inoperative by the operator) during vehicle use, possibly inadvertently. The interlock system is required under FMVSS 114. With the transmission in the park position and the ignition key off, the combined action of pressing the shift button and pulling the shift lever rearward may result in the operator overcoming the interlock system and cause the mechanical linkage of the system to disconnect. When this occurs, there is no overt indication to an operator that the system is defeated, and an increased risk of vehicle roll-away exists. Under recall 04V021, DC will replace damaged shift mechanisms, and will install on all vehicles a device which inhibits the operator's ability to overcome the interlock and defeat the system. Beginning with MY 2000, DC incorporated a brake and transmission shifter interlock (BTSI) system into the subject vehicles. Introduction of BTSI involved design changes to the shift mechanism, one of which resulted in reduced mechanical advantage (RMA) of the shift button. The RMA shifter requires increased forces to overcome the interlock system, making the shifter less susceptible to damage.
More Details: For detailed information & supporting documents, see the official NHTSA page concerning investigation #EA03011 »
Status of Investigation: This investigation was closed on January 30 2004 and there was a recall ordered: #04V021000
* This defect investigation is filed under 2 related vehicle components.
STEERING SHAFT BINDING Defect Investigation for the 1998 Cirrus
Vehicle Component: Steering
Summary: There is no summary currently available
More Details: For detailed information & supporting documents, see the official NHTSA page concerning investigation #EA99028 »
Status of Investigation: This investigation was closed on July 26 2001 and there was a recall ordered: #01I012000
STEERING SHAFT BINDING Defect Investigation for the 1998 Cirrus
Vehicle Component: Steering
Summary: There is no summary currently available
More Details: For detailed information & supporting documents, see the official NHTSA page concerning investigation #PE99030 »
Status of Investigation: This investigation was closed on September 10 1999 and no recall was issued.